概述：

雙軸撕碎機采用是雙刀輥對稱設計結構，物料通過進料倉可以自然落入刀組破碎區域，無需推料裝置可實現每個切削刀輥?zhàn)詣?dòng)均速給料。主要由撕碎刀片組、承載箱體、箱體支架、進料系統、動力系統、電器控制系統等組成。

工作原理：

金屬撕碎加工即利用撕碎機的撕碎刀片組對金屬進行撕扯、擠壓、剪切等綜合作用，撕碎成小塊的物料，從箱體下部排出。其工作原理是在大扭矩電機減速機的連續驅動下，撕碎機主軸上的刀片組輪擠壓、撕扯、剪切進入撕碎箱體內的金屬，在強大的撕扯、剪切作用下，金屬被撕裂成一定規格的小塊料。

產品優勢：

· 六方軸以及獨特的設計使其拆裝、更換刀具更方便；

· 采用微電腦自動控制，設啟動、停止、反轉及超載自動反轉控制功能；

· 高強度鋼板焊接而成，可抗高扭矩，機身堅固耐用，設備具有低扭矩、大轉矩、低噪音等特點；

· 設有智能集中潤滑系統，可設定注油時長和注油量，避免因人工疏忽造成軸承缺油造成抱死現象；

Overview

The two-shaft shredder adopts the symmetrical design structure of double knife rollers. The material can fall naturally into the knife group crushing area through the feed bin with equal-speed feed without pushing the material. It is mainly composed of shredding blade set, carrying box, box support, feeding system, power system, electrical control system, etc.

Working Principle

Metal shredding processing that is the use of shredding machine shredding blade group to tear, squeeze, shear and other comprehensive effect on the metal, shredded into small pieces of material, from the lower part of the box body discharge. Its working principle is in the high torque motor reducer continuous drive, shredder spindle blade group wheel extrusion, tearing, shear into the shredding box metal, in the powerful tearing, shearing effect, the metal is torn into a certain specification of small pieces of material.

Product Advantages

- Hexagonal shaft and unique design make it more convenient to disassemble and replace knives;

- Automatic microcomputer control with start, stop, reversing and overload automatic reversing control functions;

- High-strength steel plate welded to resist high torque, the body is robust and durable, the equipment has the characteristics of low torque, high torque and low noise;

- With intelligent centralized lubrication system, the oiling time and oiling quantity can be set to avoid the phenomenon of clamping due to lack of oil in the bearings caused by manual negligence;

技術參數：

Technical Parameters